HUAWEI B315s-936 MODEM

Paano ba Mag Openline at Mag Debrand ng B315s-936 Modem???

      





Anu nga ba ang Tinatawag na Open Line o Factory Unlock?


Factory Unlocked means that the phone/modem isn't attached to any cell phone service and can be used with any service that uses a SIM card.

Anu ba ang tinatawag na Debranding?
Base sa pagkakahula ko,, (not sure) Eto ung proseso na kung saan pinapalitan ang default o stock na firmware ng isang modem.. Correct me if I'm wrong..

Ang mga kailangan mo na tools nasa baba lang i-download mo nalang.

Huawei b315s-936 unlocking Procedure:

ETO ANG STEPS:

Step 1: enter usb mode (steady green color)
↪

 Factory Unlocked means that the phone/modem isn't attached to any cell phone service and can be used with any service that uses a SIM card.
Credits: GOOGLE

"please reffer to the image after every instruction"


NOTE: Dapat naka GREEN ung LED indicator ng modem pag hindi waley.
Pano makapasok sa USB mode? Follow the steps.

Step 1.1 . connect lan cable from the lan port of your modem to your pc and turn it on.

Step 1.2. run multicast upgrade tool as administrator.
Step 1.3.  make sure that your lan card is properly chosen under “network card” option.

Step 1.4. under “file path” option click “open” and browse for the 931.bin file. do not click “start” at this point.

Step 1.5. unplug your modem.

Step 1.6. click “start” in your multicast upgrade tool.

Step 1.7. plug your modem and wait until the signal mode indicator displays a steady red color.
Step 1.8. press and hold “wps” and “power” buttons on your modem simultaneously until the signal mode indicator’s red color turns off twice, wait about 10 seconds then release the buttons.
Step 1.9. wait until the mode indicator turns green and close multicast upgrade tool.

Step 1.10. install mobile partner on your pc to provide the necessary usb drivers for your modem. if your operating system is windows 8 or above, install the “huawei drivers” provided.

Step 1.11. connect your modem to your pc via usb cable.

Take of the com port (huaweiui interface) under lpt/com ports in device manager.

Step 2: run cid reader in usb mode and enter the following commands.

Note: select proper com port in your cid reader before entering the codes below. to check if you have chosen the right com port, click on “read imei”. the “logs” window should display the modem’s imei number otherwise select a different com port. do not edit the codes unless you know what you are doing. you might brick your modem by doing so.

Enter the foolowing codes sa CID READER

Code 1.   at ^ nvwrex 

Code 2.   at ^ syscfgex = "0203", 3fffffff, 1, 2, 800c5 ,,  

Code 3.   at+cgdcont=1,"ip","internet.globe.com.ph" 

Code 4.   at+cgdcont=1,"ip","http.globe.com.ph” 

Code 5.   at+cgdcont=1,"ip","internet” 

Code 6.    at^reset 

After ma eenter lahat ng code i-exit nalang si CID Reader......

CONGRATS.... UNOCK NA MODEM MO.

NEXT PARA SULIT ANG MODEM MO, IDEBRAND NAMAN NATIN...

Paano naman i-Debrand/Full Admin si Huawei B315s-936?

Follow steps and check images after every steps para sure na tama ginagawa mo..

Step 1. Pumasok sa USB MODE ng MODEM

Sundan lang ang step 1 ng "unlocking procedure"

Step 2. run cid reader in usb mode and enter the following commands.

Note: select proper com port in your cid reader before entering the codes below. to check if you have chosen the right com port, click on “read imei”. the “logs” window should display the modem’s imei number otherwise select a different com port. do not edit the codes unless you know what you are doing. you might brick your modem by doing so.

CODES:

code 1.     at^datalock?

code 2.     at ^ nvwrex = 50502,0,128,4a fb 2d 5a 34 74 86 f0 a6 cc ae 46 99 53 83 1d 5c b1 7e 2a ef b2 b0 1a ef 53 03 8e c8 ff 1c 0d 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8b 8c f4 b5 af 0c f2 2c fe e0 f4 46 9c cf 47 95 36 71 1f 1c bf 05 7f 84 ab a9 f2 92 89 33 3c 01 00 00 12 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 

code 3.     at^sfm=1

code 4.    at^reset 

wait until the modem reboots and shows a

steady power light indicator.

Step 4. connect your modem to your pc via usb cable under “network properties”, set ip manually as follows: 

tick “use the following ip address”

ip address: 192.168.1.100

subnet mask: 255.255.255.0

gateway: 192.168.1.1

Step 5. tick “use the following dns server adressess”

preferred dns: 192.168.1.1

alternate dns: (leave blank) ===(optional only kung ndmadetect ng pc ang modem) Click "ok"

Step 6. change firmware

step a.    Run Multi cast tool(don’t plug yet power adapter)

step b.     select correct network card, pag di madetect network card, tick “REFRESH”

step c.  Tick open and select your firmware 
( pagnapili mu na firmware na want mu then do the next step) 

step d.     tick START

step e.     PLUG now the power adapter of your 936

step f.     wait until finished (pag green naangilaw tick STOP button)close the UPGRADE TOOL

NOTE: PAG HINDI NAG GREEN ANG ILAW ULITIN LANG ANG STEP

Step 7:     Pag green light na display ng modem do the next step.

"SAME PROCEDURE SA STEP 2 IBA LANG ANG CODES"

 a.     run cid reader in usb mode and enter the following commands:

code 1:     at^sfm=0 

code 2:     at^reset

after successfully rebooting, go to network properties again and tick “obtain ip address automatically” and “obtain dns address automatically”. try to log into the modem’s web interface by typing 192.168.254.254 o 192.168.1.1 o 192.168.8.1 etc,,in your browser

or type sa key board ang "windows logo + r" type cmd hit enter

type "ipconfig" and hit enter 

hanapin ang default gateway, ang nakasulat sa def gateway un ang itype sa brower

enter the following information in the boxes na lalabas sa browser na pinag enter ng default gateway.

username:   admin

password:   admin

go to “settings”.

choose “restore default”

the modem will reboot

OH DEBRANDED NA MODEM MO... GAMITIN NA AGAD...

Download Here:

Tools:

ZAIN FIRMWARE:

DISCLAIMER:

"I DO NOT INTENT TO INFRINGE ANY INTELLECTUAL RIGHTS, AUTHORS RIGHTS OR COPYRIGHT. IF THERE ARE SOME POSTS YOU WANT ME TO REMOVE PLEASE FEEL FREE TO CONTACT ME AND I WILL DELETE THAT POSTS IMMIDIATELY"